e160k khóa 4-8 số ok | Cộng Đồng GSM Việt Nam-Đồng Hành-Hỗ trợ-Thành Công

Trùm vật tư ép kính | Bệnh Viện Điện Thoại 24h | Linh Kiện Tín Thành | Đặt chữ quảng cáo | Đặt chữ quảng cáo | Trùm điện thoại cổ độc

e160k khóa 4-8 số ok

Thảo luận trong 'Samsung' bắt đầu bởi huahaonam, 5/11/13.

  1. huahaonam

    • Super Moderator
    CA SĨ ĐỘC QUYỀN VIETNAMGSM
    Làm thành viên từ: 3/7/13
    Bài viết: 422
    Cảm ơn: 801
    Điểm: 5,935
    Nghề nghiệp: Singer actors & actresses
    Nơi ở: HACKING
    M:
    Vietnamgsm GOLD:
    Welcome to Octoplus/Octopus Box Samsung software version 1.4.0
    -----------------------------------------------------------------------------------
    To connect SC-06D phone you have to perform the following steps:
    1. Disconnect USB cable from phone.
    2. Go to Menu->Settings->Applications->Development.
    3. Turn on "USB Debugging" option.
    4. When message is appear press "Yes".
    5. Go to dial window.
    6. Enter "*#7284#" number.
    7. Set "UART" radio button to "MODEM" value.
    8. Go to "Qualcomm USB Settings".
    9. Select "DM+Modem+ADB".
    10. Close window.
    11. Go to dial window.
    12. Enter "*#9090#" number.
    13. Set "Diag config" to "UART" value.
    14. Restart phone.
    15. Press "Read Info" in software.
    -----------------------------------------------------------------------------------
    To connect SHV-E160K phone you have to perform the following steps:
    1. Go to dial window.
    2. Enter "319712358" number.
    3. Enter "774632" password.
    4. Go to System->SIO mode.
    5. Select "Modem" radio button for USB section.
    6. Go to dial window.
    7. Enter "*#9090#" number.
    8. Set "Diag config" to "USB" value.
    9. Restart phone.
    10. Press "Read Info" in software.
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM7
    Selected model: SHV-E160K
    Phone was not found on the selected port!
    Searching for USB diagnostic port...
    Connecting to phone on COM48
    Mode: Normal
    Phone model: AAABQOCZ
    Phone model is not supported
    Phone connection failed
    Connecting to phone on COM46
    Mode: Normal
    Phone model: SHV-E160K
    Firmware compiled date: May 03 2012
    Firmware compiled time: 10:00:00
    Firmware released date: Dec 19 2012
    Firmware released time: 19:49:54
    Phone IMEI: 359506-04-100538-3
    SW Version: M9200B-SCAQCSZD-3.4.706035T
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM46
    Selected model: SHV-E160K
    Mode: Normal
    Phone model: SHV-E160K
    Firmware compiled date: May 03 2012
    Firmware compiled time: 10:00:00
    Firmware released date: Dec 19 2012
    Firmware released time: 19:49:54
    Phone IMEI: 359506-04-100538-3
    SW Version: M9200B-SCAQCSZD-3.4.706035T
    Reading NVM...
    Reading NVM done!
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM46
    Selected model: SHV-E160K
    Mode: Normal
    Phone model: SHV-E160K
    Firmware compiled date: May 03 2012
    Firmware compiled time: 10:00:00
    Firmware released date: Dec 19 2012
    Firmware released time: 19:49:54
    Phone IMEI: 359506-04-100538-3
    SW Version: M9200B-SCAQCSZD-3.4.706035T
    Creating NVM backup
    Reading NVM done!
    Repairing NVM for SHV-E160K phone...
    NVM repair completed successfully
    Please, restart the phone to apply changes
     

    ****************Để giúp forum phát triển,anh em vui lòng share Facebook, Google+ ****************
    hungmobilevn and KHANHDO_GSM đã cảm ơn bài viết này.

Thành viên đang xem bài viết này (Thành viên: 0, Khách: 0)

X

Hỗ trợ kỹ thuât >> CHAT ngay !