Nokia Lumia 625 RM-943 Repair Boot / Up Rom Ok | Cộng Đồng GSM Việt Nam-Đồng Hành-Hỗ trợ-Thành Công

Trùm vật tư ép kính | Bệnh Viện Điện Thoại 24h | Linh Kiện Tín Thành | Đặt chữ quảng cáo | Đặt chữ quảng cáo | Trùm điện thoại cổ độc

Nokia Lumia 625 RM-943 Repair Boot / Up Rom Ok

Thảo luận trong 'Nokia' bắt đầu bởi ChiTruongSW, 20/1/16.

  1. ChiTruongSW

    • Moderator
    Chuyên viên kỹ thuật dự bị
    Làm thành viên từ: 23/7/13
    Bài viết: 519
    Cảm ơn: 160
    Điểm: 599
    Nghề nghiệp: Phần Mềm Di Động
    M:
    Vietnamgsm GOLD:
    Nokia Lumia 625 RM-943 Repair Boot / Up Rom Ok

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Mã:
    ATF JTAG v1.0.15.8544 (6/17/2015)
    Default language ID 0x0409, LR 14
    JTAG Interface Connected, S/N 0x915D54F9
    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Loading AFP (Please Wait)...OK
    AFP revision 4, compiled 6/25/2014 11:09:00 PM
    
    ==========================================================
    Phone Type  : Lumia 625 RM-943
    CPU Type    : Qualcomm MSM8930
    Storage Type: eMMC 8GB
    Boot Package: 3056.40000.1349.2004 (BIG BOOT)
    ==========================================================
    
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY
    3. Connect USB Cable to Phone
    4. Connect RJ-45 JTAG Cable to ATF Box
    5. Select the Correct Phone Type RM-XXX
    6. Use RESET JTAG button to check the JTAG Connection
    7. Click RESTORE BOOT button to Start Boot Repairs
    --------------------------------------------------------
    
    ==========================================================
    Phone Type  : Lumia 625 RM-943
    CPU Type    : Qualcomm MSM8930
    Storage Type: eMMC 8GB
    Boot Package: 3056.40000.1349.2004 (BIG BOOT)
    ==========================================================
    
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY
    3. Connect USB Cable to Phone
    4. Connect RJ-45 JTAG Cable to ATF Box
    5. Select the Correct Phone Type RM-XXX
    6. Use RESET JTAG button to check the JTAG Connection
    7. Click RESTORE BOOT button to Start Boot Repairs
    ----------------------------------------------------------
    Resetting and Exploring JTAG chain...1 Device(s)
    Device #1 ID 0x4F1F0F0F IR4
    Restore Boot...
    Waiting for Device Connection 15 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core with 100ms Delay...OK
    Initializing Device...OK
    Detecting eMMC #1 ID...1501004D38473259430073E74248709F
    Flash Description: Samsung M8G2YC, 7.28 GiB, SN 73E74248, Jul 1997
    Partition Config: Boot from USER, Boot ACK OFF (0x38)
    Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
    Testing Device Memory...OK
    Sending Flash Loader...OK (5960 Op/Sec)
    Restoring MBR Data...OK
    Restoring GPT Data from AFP...OK
    Restoring Partition #1...OK
    Restoring Partition #2...OK
    Restoring Partition #3...OK
    Restoring Partition #4...OK
    Restoring Partition #5...OK
    Restoring Partition #6...OK
    Restoring Partition #7...OK
    Restoring Partition #8...OK
    Restoring Partition #9...OK
    Restoring Partition #10...OK
    Completed in 0h 8m 30s. Code Download Speed 346 KiB/sec.
    
    Boot Restore Done!
    =============================================================
    Assemble Phone and Start Normally
    If Phone cannot Start, perform USB Firmware Update Procedure
    =============================================================
    
    
    Windows Phone 8/8.1/10 Flashing Started
    Loading Flash Files Please Wait...
                                                         
    ======================================================
             Windows Phone 8/8.1/10 Lumia Flasher          
    ======================================================
                                                         
    If the Phone is ALIVE                                
      1. Power On the Phone and Connect it to the USB Port
                                                         
    If the Phone is DEAD                                 
      1. Connect Phone to the USB Port                   
      2. Press and Hold the VOLUME DOWN and POWER Buttons
      3. Wait until the Phone Vibrates Shortly...        
      4. Stop Pressing the Buttons...                    
                                                         
    If the Phone is DEAD BOOT                            
      1. Connect Phone to the USB Port                   
      2. Install Correct Drivers:                        
         "Nokia Emergency Connectivity" Located at:      
                                                         
    C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
    ======================================================
                                                         
    Nokia Phone Info Mode Initiated...
    Please wait upto 15 Seconds for SW Reset
    Version: 1.1.1.3
    Product Code: 059T3L3
    Module Code: 0205641
    
    Continuing Previous Boot...
    Please wait upto 30 Seconds for Boot Re-entry
    
    Boot Flash Mode Successful...
    Buffers Flushed OK...
    
    Phone Info Query Start...
    Blocks Returned: 0x07 Blocks
    Block ID 0x01 : 00241000
    Block ID 0x02 : 00240000
    Block ID 0x03 : 00E90000
    Block ID 0x05 : Nokia.MSM8227.P6083.1.2
    Block ID 0x0D : 0001
    Block ID 0x0F : 0301010100000101FF
    Block ID 0x10 : 0100130000
    Checking SD Card Size...
    Card Size: 0x00000000
    Checking Platform Security Status...
    Platform Secure Boot Status: Active
    Secure FFU EFUSE Status: Active
    Debug Status: Active
    RDC Status: Not Active
    Authentication Status: Not Active
    UEFI Secure Boot Status: Active
    Checking Secure FFU Mode...
    Secure FFU Mode :
    Query Flash App Information...
    Flash App Information: 02010F011C00
    UEFI App: FLASH APP
    Flash App Protocol Version: 1.15
    Flash App Implementation Version: 1.28
    Query ROOT KEY HASH...
    ROOT_KEY_HASH: 3676E9A0045A7EF8417B8E0E0677CED5F9DD47799826AEAE75F7081818DE716E
    Query PUBLIC ID...
    PUBLIC_ID: 4A8F73D06E9948E58A299DA7ABF49896DD6CF070
    Query eMMC Info...
    EMMC Manufacture ID: SAMSUNG
    EMMC Product SN : 73E74248
    EMMC_SIZE: 8 Gigabytes
    Query Battery Charge Status...
    BATTERY CHARGE_STATUS: 31%
    
    Sending Image Signatures...
    Image Signatures Accepted!
    Erasing Data Partition...
    Data Partition Erased Successfully
    Preparing Buffers for DATA LOOP...
    Allocating System RAM OK!
    Start Sending DATA BLOCKS...
    Finished Sending all DATA BLOCKS!
    Exiting FLASH Mode via REBOOT...
    Exit FLASH Mode Successful!
    
    Flashing Done!
    Total Flashing Time : 00:02:16
    
     

    ****************Để giúp forum phát triển,anh em vui lòng share Facebook, Google+ ****************

Thành viên đang xem bài viết này (Thành viên: 0, Khách: 0)

X

Hỗ trợ kỹ thuât >> CHAT ngay !