Nokia Lumia 900 unlock ok | Cộng Đồng GSM Việt Nam-Đồng Hành-Hỗ trợ-Thành Công

Trùm vật tư ép kính | Bệnh Viện Điện Thoại 24h | Linh Kiện Tín Thành | Đặt chữ quảng cáo | Đặt chữ quảng cáo | Trùm điện thoại cổ độc

Nokia Lumia 900 unlock ok

Thảo luận trong 'ATF BOX' bắt đầu bởi truyengsm, 20/11/13.

  1. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    Bạn không thể xem nội dung này - Vui lòng đăng ký thành viên để được xem ! Cảm ơn.​
    Mã:
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK
    Retrieving Unlock Codes...
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    PIN: 74381195
    PUK: 41448600
    ===================================
     

    ****************Để giúp forum phát triển,anh em vui lòng share Facebook, Google+ ****************
    longcagsm đã cảm ơn bài này.
     
  2. longcagsm

    • Moderator
    Chuyên viên kỹ thuật cấp 4
    Làm thành viên từ: 16/7/13
    Bài viết: 1,539
    Cảm ơn: 1,298
    Điểm: 1,513
    Nghề nghiệp: Mobile Service
    Nơi ở: Q Tân Phú
    M:
    Vietnamgsm GOLD:
    quá nhanh hả anh:45.jpg:
     
    truyengsm đã cảm ơn bài này.
  3. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    Thêm 1 chú ​
    Bạn không thể xem nội dung này - Vui lòng đăng ký thành viên để được xem ! Cảm ơn.​
    Mã:
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK
    Retrieving Unlock Codes...
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    PIN: 25968664
    PUK: 00326982
    ===================================
     
  4. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    THÊM 1 CHÚ

    2013-12-28_14-14-30.jpg
    Mã:
     Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
     
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK
    Retrieving Unlock Codes...
     
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    PIN: 71410319
    PUK: 74211823
    ===================================
    Reading Unlock Codes Done!
     
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
     
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    ============================================================================
     
  5. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    thêm 1 chú
    Screenshot (141).jpg
     
    longcagsm đã cảm ơn bài này.
  6. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    thếm chú nữa

    Screenshot (1).jpg
    Mã:
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK
    Retrieving Unlock Codes...
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    PIN: 41638134
    PUK: 66586302
    ===================================
    Reading Unlock Codes Done!
     
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    ============================================================================
    
     
    panrai đã cảm ơn bài này.
  7. panrai

    • VIP
    Chuyên viên kỹ thuật dự bị
    Làm thành viên từ: 27/6/13
    Bài viết: 1,255
    Cảm ơn: 1,092
    Điểm: 960
    Nghề nghiệp: công ty TNHH 1 Thành viên ARB
    Nơi ở: long xuyên an giang
    M:
    Vietnamgsm GOLD:
    mua box hơn 1 năm,updal hơn 3 tháng chưa có 1 kèo unlock :6.jpg:,chắc thằng em bán lấy tiền mua sửa cho con quá anh già :45.jpg:
     
  8. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    thêm 2 chú vo 1 chổ

    6-6-2014 1-42-05 PM.jpg 6-6-2014 2-05-50 PM.jpg
    Mã:
    Default language ID 0x0409
    JTAG Interface Connected, S/N 0x915D54F9
    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Loading AFP (Please Wait)...OK
    AFP revision 3, compiled 9/23/2013 7:35:00 PM
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73189 Op/Sec)
    Retrieving Unlock Codes...OK
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    Level 1 PIN: 81663182 ACTIVE
    Level 1 PUK: 83593102 ACTIVE
    Level 2 PIN: 44867806
    Level 2 PUK: 90238894
    Level 3 PIN: 26361005
    Level 3 PUK: 87434315
    Level 4 PIN: 12820290
    Level 4 PUK: 33490679
    Level 5 PIN: 39849477
    Level 5 PUK: 17108265
    ===================================
    Reading Unlock Codes Done!
     
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    ============================================================================
    
    Mã:
    Default language ID 0x0409
    JTAG Interface Connected, S/N 0x915D54F9
    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Loading AFP (Please Wait)...OK
    AFP revision 3, compiled 9/23/2013 7:35:00 PM
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73189 Op/Sec)
    Retrieving Unlock Codes...OK
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    Level 1 PIN: 81663182 ACTIVE
    Level 1 PUK: 83593102 ACTIVE
    Level 2 PIN: 44867806
    Level 2 PUK: 90238894
    Level 3 PIN: 26361005
    Level 3 PUK: 87434315
    Level 4 PIN: 12820290
    Level 4 PUK: 33490679
    Level 5 PIN: 39849477
    Level 5 PUK: 17108265
    ===================================
    Reading Unlock Codes Done!
     
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    ============================================================================
    Loading AFP (Please Wait)...OK
    AFP revision 3, compiled 9/23/2013 7:35:00 PM
    ==========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73159 Op/Sec)
    Retrieving Unlock Codes...Flash Read Error at 0x05FA0000, Checksum Error in Loader Answer
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73160 Op/Sec)
    Retrieving Unlock Codes...OK
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    Level 1 PIN: 28691558 ACTIVE
    Level 1 PUK: 66296850 ACTIVE
    Level 2 PIN: 11182884
    Level 2 PUK: 39555137
    Level 3 PIN: 36849327
    Level 3 PUK: 14318480
    Level 4 PIN: 79320587
    Level 4 PUK: 52708786
    Level 5 PIN: 93594663
    Level 5 PUK: 14087226
    ===================================
    Reading Unlock Codes Done!
     
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    ============================================================================
    
     
  9. truyengsm

    • Admin Vietnamgsm
    Product Manager
    Làm thành viên từ: 27/6/13
    Bài viết: 3,102
    Cảm ơn: 4,469
    Điểm: 10,375
    Nghề nghiệp: Unlock - Repair boot - Nạp Tiếng Việt all Mobile
    Nơi ở: 739 Đường 3/2 F6 Q10 TPHCM
    M:
    Vietnamgsm GOLD:
    thêm 1 chú unlock ok

    8-1-2014 8-17-13 PM.jpg
    Mã:
    =========================================================
    Phone Type  : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================
    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...Memory Verify Error at 0x40000A90
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73193 Op/Sec)
    Retrieving Unlock Codes...OK
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    Level 1 PIN: 39061798 ACTIVE
    Level 1 PUK: 62093596 ACTIVE
    Level 2 PIN: 76867915
    Level 2 PUK: 30140256
    Level 3 PIN: 86779427
    Level 3 PUK: 47652517
    Level 4 PIN: 75064641
    Level 4 PUK: 90287448
    Level 5 PIN: 87329445
    Level 5 PUK: 84619557
    ===================================
    Reading Unlock Codes Done!
    
    ============================================================================
    1. Remove JTAG Connection and Assemble Phone
    2. Insert SIM Card from different Provider into the Phone
    3. Power ON the Phone
    4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
    5. After Code is accepted, wait 30 seconds until Operator Signal Appears
            This is PERMANENT UNLOCK...  Flashing will NOT RE-LOCK PHONE
    =================================================================================
     

    Các file đính kèm:

    mynhoc đã cảm ơn bài này.

Thành viên đang xem bài viết này (Thành viên: 0, Khách: 0)

X

Hỗ trợ kỹ thuât >> CHAT ngay !