0. Download the tool OMAPFlash_1229_2ndlastt from the first post and extract it somewhere. 1. Get your firmware from **************. it will be an *.tar.md5 file. make a copy of the *.tar.md5 file and rename to *.tar file. 3. open the tar file with winrar and extract "MLO" "param.lfs" and "Sbl.bin" and keep somewhere. 4. Now go to the downloaded OMAPFlash_1229_2ndlastt\Targets\Projects\espresso folder copy and replace "MLO" "param.lfs" and "Sbl.bin" with files extracted earlier. 5. Take the battery off the phone. connect the phone with pc while keeping windows device manager opened. Omap4430 will be shown for a second or two. double click quickly on that and from properties update the driver with windows driver provided in OMAPFlash_1229_2ndlastt 6. after driver is installed, disconnect phone from pc and run omap4430hs_espresso_1200MHZ.bat. it will prompt you to connect the phone. 7. connect the phone and the repair will be done in 30 sec and it will say "waiting for device". Now disconnect the phone and insert the battery but do not turn on. 8. now insert a USB Jig and phone will immediately go to download mode. 9. As you have already replaced "MLO" "param.lfs" and "Sbl.bin" with your choice of firmware files it flash like dream Enjoy your resurrected I9100G!!!! Bạn không thể xem nội dung này - Vui lòng đăng ký thành viên để được xem ! Cảm ơn.