Repair product name I9300 ok Easy Jtag | Cộng Đồng GSM Việt Nam-Đồng Hành-Hỗ trợ-Thành Công

Trùm vật tư ép kính | Bệnh Viện Điện Thoại 24h | Linh Kiện Tín Thành | Đặt chữ quảng cáo | Đặt chữ quảng cáo | Trùm điện thoại cổ độc

Repair product name I9300 ok Easy Jtag

Thảo luận trong 'Z3x Box' bắt đầu bởi joneskiller2008, 7/8/14.

  1. joneskiller2008

    • VIP
    Gia đình Vietnamgsm
    Làm thành viên từ: 15/7/13
    Bài viết: 246
    Cảm ơn: 226
    Điểm: 228
    M:
    Vietnamgsm GOLD:
    Snap5.jpg
    EasyJtag Suite ver.: 1.1.0.1 / wxWidgets 3.1.0-W-U started.
    Operating system ver.: Windows XP (build 2600, Service Pack 3).
    Successefuly connected to box on COM49
    Box S/N: 0F00200525660554, ,FW Ver.: 01.49
    Box Working Mode: JTAG Box.
    Box Drivers version: 3.0.0.0, are OK
    Z3X Card Serial : AA0B-B136 , ver: 22
    Z3X EasyJtag Software ver. 1.1.0.1
    Loading eMMC Addon Firmware...
    Box S/N: 0F00200525660554, ,FW Ver.: 01.49
    Warning: CMD Pullup Level (897 mV) too low , check cables etc.!!!
    CMD Active Level:1134 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF13A6765C66F9A
    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 06/2012 Rev.0xf1
    EMMC NAME: VTU00M , S/N: 979854790
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Extended CSD rev 1.6 (MMC 4.5)
    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_ 979854790_20140704_1500.extcsd
    Done.
    Writing file...E:\File easy\I9300\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_00200000.bin
    Z3X EasyJtag Software ver. 1.1.0.1
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:897 mV
    CMD Active Level:1134 mV
    Writing 000000200000 bytes to 00000000 ...ROM0
    Write Speed: 493 kB/s
    Done !!!
    Writing file...E:\File easy\I9300\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000_20000000.bin
    Z3X EasyJtag Software ver. 1.1.0.1
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:897 mV
    CMD Active Level:1134 mV
    Writing 000020000000 bytes to 00000000 ...ROM0
    Write Speed: 481 kB/s
    Done !!!
     

    ****************Để giúp forum phát triển,anh em vui lòng share Facebook, Google+ ****************
    jimmyhuyphong đã cảm ơn bài này.
  2. pinmobilepr

    • Moderator
    Team repair boot
    Làm thành viên từ: 10/3/14
    Bài viết: 923
    Cảm ơn: 893
    Điểm: 1,001
    Nghề nghiệp: Flashing
    Nơi ở: PinMobile 203c Ngô Gia Tự, Ninh Thuận
    M:
    Vietnamgsm GOLD:
    one more !
    Extended CSD rev 1.6 (MMC 4.5)
    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_ 514333022_20141002_0233.extcsd
    Done.
    Running:SAMSUNG: MoviNAND Reset + Format...

    Z3X EasyJtag Software ver. 1.6.3.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:876 mV
    CMD Active Level:1103 mV
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Sending Internal Reconfiguration Request...
    Waiting configuration Apply!!!
    Restoring configuration...
    EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Wiping Card... Please do not touch it!!!
    Done.
    Please don't forget to repair extCSD from backup!!!

    Z3X EasyJtag Software ver. 1.6.3.0
    Loading eMMC Addon Firmware... IO: 1850 mV
    Box S/N: 060120136B5AE247, ,FW Ver.: 01.50
    CMD Pullup Level:1185 mV
    CMD Active Level:1557 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF11EA8195E6F3E
    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 06/2012 Rev.0xf1
    EMMC NAME: VTU00M , S/N: 514333022
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Extended CSD rev 1.6 (MMC 4.5)
    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_ 514333022_20141002_0235.extcsd
    Done.

    Z3X EasyJtag Software ver. 1.6.3.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:1185 mV
    CMD Active Level:1557 mV
    Input file : C:\Documents and Settings\Admin\Desktop\i9300_atf_emmc\I9300_ATF_EMMC\S3_BOOT1_0x00000000_0x00000FFF.bin
    Writing 000000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
    Write Speed: 828 kB/s
    Done !!!

    Z3X EasyJtag Software ver. 1.6.3.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:1185 mV
    CMD Active Level:1557 mV
    Input file : C:\Documents and Settings\Admin\Desktop\i9300_atf_emmc\I9300_ATF_EMMC\S3_BOOT2_0x00000000_0x00000FFF.bin
    Writing 000000200000 bytes to 00000000 ...ROM3 (BOOT2 ROM)
    Write Speed: 1837 kB/s
    Done !!!

    Z3X EasyJtag Software ver. 1.6.3.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:1185 mV
    CMD Active Level:1557 mV
    Input file : C:\Documents and Settings\Admin\Desktop\i9300_atf_emmc\I9300_ATF_EMMC\S3_USER_AREA_0x00000000_0x001EC209.bin
    Writing 00003d841200 bytes to 00000000 ...ROM1 (USER ROM)
    Write Speed: 4257 kB/s
    Done !!!

    Z3X EasyJtag Software ver. 1.6.3.0
    Loading eMMC Addon Firmware... IO: 1850 mV
    Box S/N: 060120136B5AE247, ,FW Ver.: 01.50
    CMD Pullup Level:1185 mV
    CMD Active Level:1557 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF11EA8195E6F3E
    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 06/2012 Rev.0xf1
    EMMC NAME: VTU00M , S/N: 514333022
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Extended CSD rev 1.6 (MMC 4.5)
    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_ 514333022_20141002_0243.extcsd
    Done.
     
    KHANHDO_GSM đã cảm ơn bài này.

Thành viên đang xem bài viết này (Thành viên: 0, Khách: 0)

X

Hỗ trợ kỹ thuât >> CHAT ngay !