Unbrick Repair boot Amazon Kindle Fire HD X43Z60 ok | Cộng Đồng GSM Việt Nam-Đồng Hành-Hỗ trợ-Thành Công

Trùm vật tư ép kính | Bệnh Viện Điện Thoại 24h | Linh Kiện Tín Thành | Đặt chữ quảng cáo | Đặt chữ quảng cáo | Trùm điện thoại cổ độc

Unbrick Repair boot Amazon Kindle Fire HD X43Z60 ok

Thảo luận trong 'Z3x Box' bắt đầu bởi Repair_Mobile, 11/10/16.

  1. Repair_Mobile

    • Super Moderator
    Call SMS: 0908660747. Đ/C: 529/5 Huỳnh Văn Bánh
    Làm thành viên từ: 2/11/13
    Bài viết: 3,514
    Cảm ơn: 353
    Điểm: 39
    Nghề nghiệp: Unlock & Repair boot All Mobile
    Nơi ở: 529/5 Huỳnh Văn Bánh, P.14, Q.Phú Nhuận, TP.HCM
    M:
    Vietnamgsm GOLD:
    Z3X EasyJtag Software ver. 2.3.0.0
    Loading eMMC Addon Firmware... IO: 3300 mV
    Box S/N: 1616041EE68FC104, ,FW Ver.: 01.55CMD Pullup Level:2000 mV
    CMD Active Level:2701 mV
    Box IO Level:3300 mV
    CLK Rate:21000 khz
    HiPower mode is ON!
    ---------- eMMC Device Information ----------
    EMMC CID : 1501004D4147324741005810D7745F8A
    EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 05/2012 Rev.0x0
    EMMC NAME: MAG2GA , S/N: 1477498740
    EMMC NAME (HEX): 4D414732474100
    EMMC ROM1 (Main User Data) Capacity: 14910 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    EMMC Password Locked: No
    Extended CSD rev 1.5 (MMC 4.41)
    Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
    H/W reset function [RST_N_FUNCTION]: 0x00
    High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
    Partitioning Support [PARTITIONING_SUPPORT]: 0x03
    Device support partitioning feature
    Device can have enhanced tech.
    Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
    ---------------------------------------------
    Backup saved: MAG2GA_1477498740_20161011_1334.extcsd
    Done.

    Checking NAND Image : C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM1_MAG2GA_167813583_00000000_40000000.bin
    File successefuly loaded!
    Found ROM2 and automatically selected.
    Found ROM3 and automatically selected.
    Found EXT CSD and automatically selected.
    Processing file...C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\MAG2GA_ 167813583_20160424_0027.extcsd
    Processing file...C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM1_MAG2GA_167813583_00000000_40000000.bin
    Running:Repair extCSD...
    Z3X EasyJtag Software ver. 2.3.0.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:2000 mV
    CMD Active Level:2701 mV
    Box IO Level:3300 mV
    CLK Rate:21000 khz
    Writing...
    Processing file...C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM2_MAG2GA_167813583_00000000_00200000.bin
    Processing file...C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM3_MAG2GA_167813583_00000000_00200000.bin
    Done.

    Z3X EasyJtag Software ver. 2.3.0.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:2000 mV
    CMD Active Level:2701 mV
    Input file : C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM1_MAG2GA_167813583_00000000_40000000.bin
    Writing 0040000000 bytes to 00000000 ...ROM1 (USER ROM)
    Full Verify Enabled!
    Retry writing adress 0x00000C00 (Attempt #1)...
    Retry Success!
    Verify Block Failed , block #0x00001200Done.

    Z3X EasyJtag Software ver. 2.3.0.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:2000 mV
    CMD Active Level:2701 mV
    Input file : C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM2_MAG2GA_167813583_00000000_00200000.bin
    Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
    Full Verify Enabled!
    Done. Write Speed: 702 kB/s

    Z3X EasyJtag Software ver. 2.3.0.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:2000 mV
    CMD Active Level:2701 mV
    Input file : C:\Users\PHONG\Desktop\AMAZON_KINDLE_FIRE_HD_X43Z60_emmc_direct_dump\EMMC_ROM3_MAG2GA_167813583_00000000_00200000.bin
    Writing 0000200000 bytes to 00000000 ...ROM3 (BOOT2 ROM)
    Full Verify Enabled!
    Done. Write Speed: 688 kB/s
     

    ****************Để giúp forum phát triển,anh em vui lòng share Facebook, Google+ ****************
     

Thành viên đang xem bài viết này (Thành viên: 0, Khách: 0)

X

Hỗ trợ kỹ thuât >> CHAT ngay !