Share rom stock Wiko U Feel Prime P7201

Chú này rom read ra có tên là ''P7201 TINNO'' khởi động không có logo models, nhìn rất giống ''Wiko U Feel Prime'' trước khi up rom anh em nên info thông tin xem có giống log này hay không rồi hả up nhé

Download rom => Bạn không thể xem nội dung này - Vui lòng đăng ký thành viên để được xem ! Cảm ơn.
​

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005EF355
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 5292C836A10D3A35124789965128A8A0
ID_BLOCK_L : 3548F6595AC575FE13E2B76C6689A7A4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG2e
Boot Ok!


Brand : TINNO
ProdName : p7201
ProdModel : p7201
Device : p7201
AndroidVer: 6.0.1
Manufact. : P7201
QLMxCPU : MSM8937

DevInfo : MSM8937__P7201__TINNO__ANDR_v6.0.1__p7201__p7201__p7201

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 3134 MiB

Done!
Elapsed: 00:07:43

​